Specifying Send Options
To correctly display the top/bottom orientation of the scanned original on a client computer, the placement of the original and the settings made on the control panel must match.
The following table shows the relationship between the original orientation and the control panel settings.
Placing an Original on the Exposure Glass
Original orientation | Control Panel Key |
top edge touches top left corner of exposure glass
top edge touches rear of exposure glass
5
Placing an Original in the ADF/ARDF
Original orientation | Control Panel Key |
top edge placed first
top edge touches rear of ADF/ARDF
Note
❒Originals are normally rectangular (
) or horizontally long (
). However, the table above uses squares to make original orientation easier to under- stand. Even if the actual shape of the original is different, the combination of original orientation and the orientation specified on the scanner driver does not change.
97