Specifying Destination

K Press [Search].

1

Destinations that match the search conditions are displayed.

L Press {U} or {T} to select the destination, and then press {V}.

The check box on the left side of the selected destination is selected.

M Press {OK}.

Note

❒Up to 100 destinations can be displayed as search results.

❒If an e-mail address returned by the LDAP server is too long, it will be im- possible to specify it as the destination. For details about the number of characters that can be specified, see "E-mail".

❒It is possible for more than one e-mail address to be registered for a desti- nation. However, only one e-mail address per destination will appear in the search results. It depends on the LDAP server which e-mail address will be displayed. Usually, it is the e-mail address registered first.

❒You can select criteria from the following list:

•[Include]: The names which contain an entered character or characters are targeted.

Example) To find "ABC", enter "A", "B" or "C".

•[Exclude]: The names which do not contain an entered character or charac- ters are targeted.

Example) To find "ABC", enter "D".

•[First Word]: The names which start with the entered character or characters are targeted.

Example) To find "ABC", enter "A".

•[Last Word]: The names which end with the entered character or characters are targeted.

Example) To find "ABC", enter "C".

23