Specifying Destination

Selecting a destination from a list

Use the following procedure to select a destination from the list.

A Press {Search Destination}.

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ALP003S

B Press {U} or {T} to select [Display Destination List], and then press {OK}.

C Press {U}or {T} to select the destination from the list, and then press {V}.

The check box on the left side of the selected destination is selected.

Repeat this step to add more destinations.

D Press {OK}.

Note

If under [System Settings], [LDAP Search] is set to [On], a screen to select a search object appears when you press {Search Destination}. On the screen, select [Search Address Book], and then press {OK}.

To cancel a selected destination, press {U} or {T} to select the target des- tination, and then press {W}.

Depending on the security settings, some destinations may not appear in

the destination list.

15