Connecting the enclosure to your computer

Notes:

Connect the enclosure with your computer either through a USB or eSATA connection. If you are using an eSATA connection, the AC adapter is required.

The enclosure provides USB and eSATA dual interface for host connectivity. The high-speed eSATA port has priority over the USB port when both are connected at the same time.

To connect the enclosure to your computer:

1Plug one end of a USB 2.0 cable or eSATA cable to the enclosure, then plug the other end of the cable to your computer.

2Plug one end of the power adapter into the enclosure, then plug the other end to an AC outlet if you are using eSATA mode.

The operating system automatically detects and sets up the new drive.

Installing the backup software

Note: This Roxio BackOnTrack software only runs on Windows XP and Windows Vista PCs using USB mode.

Before installing the backup software, make sure that your Windows operating system has been updated to the latest service pack. To make sure you have the lasted service pack, run Windows Update. No additional driver is required.

RF-AHD25 9