Roku Music Player manual Background, Why Wi-Fi?, Wi-Fisetup instructions

Background

This manual is intended for customers who want to set up the SoundBridge for use with a Wi-Fi network. For complete instructions on using SoundBridge, please read the SoundBridge User Guide, included with your SoundBridge product or available for download at www.rokulabs.com/support in PDF format.

Why Wi-Fi?

With SoundBridge’s wireless functionality, you can now stream music from computers on your wireless network to one or more Wi-Fi enabled SoundBridge devices via your wireless access point (WAP). You can even connect up to five SoundBridges to one iTunes music library and listen to different tunes in every room of your house.

Wi-Fi setup instructions

1.Verify that your wireless network is up and running on your computer. If you are setting up this wireless network for the first time, please make sure that you have followed your wireless vendor’s instruction manual for proper configuration of your wireless access point.

2.Remove both the left and right end caps of SoundBridge by pressing on the two release tabs labeled “push”. If your SoundBridge is currently powered on, press Standby on your remote and then disconnect SoundBridge from power by unplugging the AC power cord.

3.Remove the wireless card from its packaging and insert the card into the CF slot on the left side of SoundBridge. Make sure that the “Roku” label and two small status lights are facing away from you as you gently push the card into place. (Note: The LED lights will not be illuminated until you power on SoundBridge). Be careful, forcing the card into position may damage your device.

4.If you had been previously using a wired Ethernet connection, disconnect the cord from the SoundBridge. Make sure you only have the Wi-Fi card or the wired Ethernet connection attached to the device– never both at the same time.

5.Start up iTunes or SlimServer on your computer, which is connected to your wireless network.

6.Turn on your Soundbridge by plugging the power cord into the right side of the device, then into the wall AC outlet. Verify that the screen displays the Roku logo.

7.Upon startup, SoundBridge will attempt to connect to any wireless access point within range that does not require a password. If your home wireless network requires no password and there are no other wireless networks in the vicinity (such as those spilling over from a neighbor's house), then your SoundBridge should automatically connect with no additional configuration, and you will see a list of music servers on your network to connect to.

However, it’s possible you will need to configure your wireless network as described below:

-If your SoundBridge detects more than one available wireless network, then you will need to configure SoundBridge’s Wi-Fi settings. Choose "System Configuration" from the main menu, and then select "Select Wi-Fi SSID & Password." You will then see a list of available wireless networks. If you see your desired network, select it. If you don't see the desired network, make sure that your wireless router is within range and that it is functioning properly.

-Some wireless networks don't "advertise" themselves (a.k.a., “closed networks”). If your wireless access point is functioning properly but you do not see the network listed, you should enter your wireless network name by selecting "Specify a wireless network..." (Refer to your wireless access point’s documentation or utility software if you don’t know the name of your wireless network.)