Roku Music Player manual Audio cable connectors, IV. Hooking Up Your Speakers or Stereo System

III. Hooking Up Your Home Network Hardware (Wired Ethernet or Wireless)

Ethernet Connection

Plug your cable into the jack provided on the right side of the rear of the unit. Connect your Ethernet cable to a hub, switch or router on your home network. Alternatively, you can connect SoundBridge directly to your computer (and bypass a hub/switch/router), but only with a “crossover” cable (sold separately). Connect the other end of the cable to your network.

Wireless Connection

No need to install any additional hardware into SoundBridge. Please note that most, but not all, wireless access points are compatible with SoundBridge. You can find a list of supported wireless hardware at www.rokulabs.com/support.

IV. Hooking Up Your Speakers or Stereo System

Connect your choice of audio cables into the back left side of SoundBridge depending on your preferred connection option.

Audio cable connectors

Digital Audio Outputs AC Adapter Connection

Optical Coax

Analog 1/8” Miniplug	Wired Ethernet
	Network Connection

10 Section 1: Getting Started