Error Messages

Indication

Meaning

 

 

 

 

 

 

 

 

 

You can only read the music file. It can not be saved.

 

 

 

 

 

 

 

 

An error occurred during writing.

 

 

 

 

 

 

The external media’s protect tab may be in the “Protect” (writing prohibited) position, or the external media may not yet be initialized.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No external media is inserted. Insert the external media and try again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is not sufficient free memory in the save destination. Either insert other external media or delete unneeded files and try again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

An error occurred during reading. The external media may be corrupted.

 

 

 

 

 

 

Insert other external media and try again. Alternatively, you can initialize the external media.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The file is unreadable. The data format is not compatible with the HP305/HP302.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Data was not called up in time for playback of the song. After waiting several seconds, you may be able to play back the song by

 

 

 

 

 

 

pressing the [

 

] button again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This audio format is not supported.

 

 

 

 

 

 

Please use 44.1 kHz 16-bit linear WAV format audio files.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The internal memory capacity of the HP305/HP302 is full.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The HP305/HP302 cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the amount of MIDI data sent

 

 

 

 

 

 

to the HP305/HP302.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A MIDI cable has been disconnected. Connect it properly and securely.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved after you have tried several times,

 

 

 

 

 

 

contact the Roland service center.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The External Memory connector was subjected to excessive current. Make sure that there is no problem with the external media, then

 

 

 

 

 

 

turn the power off, then on again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Panel Lock function is on (p. 38).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Twin Piano function is on (p. 32).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you record a performance, then select a song before you’ve saved your recording, “dEL” will appear, flashing, in the display (p. 44).

 

 

 

 

 

 

* External Media: USB memory, Floppy Disk, CD-ROM, etc.

77

Page 75
Image 75
Roland HP302, HP305 important safety instructions Error Messages, Indication Meaning