Saving Music Assistant settings to disk
You can store up to 32 Music Assistant settings, including Manual settings, on the
Music Assistant settings can only be saved on a disk that has been formatted by the
1.Set the Write Protect tab on the disk to the “Write” position and insert the disk into the disk drive.
2.Press the [Music Assistant] button.
The Music Assistant screen is displayed.
3.Press <Disk...>.
4.Use <▲> and <▼> to the right of the display to select a number.
You can choose any number between “1” and “99”. Note that selecting a number that already contains data means that the set in question (i.e. 32 Music Assistant settings) will be overwritten by your new set.
5.Use <√> and <®> below the display and <▲> and <▼> to the left of the display to enter a name. See page 34 for a list of available characters.
6.Press <Save> at the bottom right of the display. Note: To cancel without saving the Set, press the [EXIT] button.
Loading a Music Assistant set from disk
1.Insert the floppy disk that contains the desired Music Assistant file into the disk drive.
2.Press the [Music Assistant] button.
The Music Assistant screen is displayed.
3.Press <Disk...>.
4.Use <▲> and <▼> to the right of the display to choose the set.
5.Press <Load> at the bottom right of the display. Note: Please bear in mind that loading a set means that all
32internal Music Assistant memories will be overwritten. You may want to save them to disk first (see above). Note: To stop the operation, press the [EXIT] button.
11.2Performance Pad buttons: additional or frequently used functions
You can assign a wide variety of
1.On the Basic screen, press <Pad/Pedal>.
2.Use <▲> and <▼> next to the display to assign a function to “Pad 1” and “Pad 2.”
Press [EXIT] if you’ve changed your mind about assigning one of the following functions to a Perfor- mance Pad button.
Here are the functions you can assign to the Perfor- mance Pad buttons:
Leading Bass— This switches the Leading Bass func- tion on or off. During normal Style Play, the root of the chord played is used as the bass note, but when the Leading Bass function is used, the lowest note of the chord actually played is used as the bass note. This means that the bass note changes when an inverted chord is used.
Note: If you assign this function to a footswitch, the Leading Bass function is “On” whenever the footswitch is depressed.
Break— Break is a great function for Rock’n’Roll songs and ballads. Use it to halt the Arrangement either for the remainder of the current bar or for an entire bar (when pressed on the last beat of a bar). Usually, the melody or solo continues during such a silent (tacet) bar. This feature allows you to achieve the breaks in “Great Balls Of Fire”, for example.
Fill In To Variation.— This has the same function as the [TO VARIATION] button.
Fill In To Original.— This has the same effect as the [TO ORIGINAL] button.
Fill In— This inserts a
Original/Variation— This changes to Original or Variation without inserting a
46
