Chapter 2 Using the XV-3080 Effects

44:RING MODULATOR

Ring Modulator is an effect which applies amplitude modulation (AM) to the input signal, producing bell-like sounds.

You can also change the modulation frequency according to the volume of the sound input to the effects device.

L in Ring Mod 2-Band EQ L out

R in Ring Mod 2-Band EQ R out

Freq (Frequency) #

Sets the frequency at which modulation will be applied.

Mod (Modulator)

Selects the input of the source sound for the envelope controlling the modulation.

When set to Source, the frequency is modulated according to the envelope of the sound input to the multi-effects.

Mon (Modulator Monitor)

Determines whether the input sound used as the modulator is output (ON) or not (OFF).

Sens #

Sets the amount of frequency modulation applied.

Pol (Polarity )

Determines whether the frequency modulation moves towards higher frequencies (UP) or lower frequencies (DOWN).

LowGain

Adjust the low frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the low frequency range.

Hi Gain

Adjust the high frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the high frequency range.

Balance (Effect Balance) #

Sets the volume balance between the source sound and the effect sound.

With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W the effect sound will be output.

Level (Output Level)

Adjust the output level.

45:MULTI TAP DELAY

The Multi Tap Delay has four delays. Each of the Delay Time parameters can be specified as a note length of the selected tempo. You can also set the panning and level of each delay sound.

 

 

Balance D

 

L in

 

 

2-Band

L out

 

 

EQ

Feed

Delay 1

 

 

 

 

 

back

Delay 3

Balance W

 

 

 

 

 

 

 

 

Multi Tap Delay

 

 

 

 

Delay 4

 

Balance W

 

 

Delay 2

 

2-Band

 

R in

 

 

R out

 

Balance D

EQ

 

 

 

 

 

 

 

Delay 1 (Delay Time 1)

Adjust the delay time from the original sound until the delay 1 sound is heard.

Delay 2 (Delay Time 2)

Adjust the delay time from the original sound until the delay 2 sound is heard.

Delay 3 (Delay Time 3)

Adjust the delay time from the original sound until the delay 3 sound is heard.

Delay 4 (Delay Time 4)

Adjust the delay time from the original sound until the delay 4 sound is heard.

Pan 1 (Output Pan 1)

Sets the stereo position of the delay sound (Delay 1). A setting of L64 is far left, 0 is center, and 63R is far right.

Pan 2 (Output Pan 2)

Sets the stereo position of the delay sound (Delay 2). A setting of L64 is far left, 0 is center, and 63R is far right.

Pan 3 (Output Pan 3)

Sets the stereo position of the delay sound (Delay 3). A setting of L64 is far left, 0 is center, and 63R is far right.

an 4 (Output Pan 4)

Sets the stereo position of the delay sound (Delay 4). A setting of L64 is far left, 0 is center, and 63R is far right.

Level 1

Adjust the output level of delay 1.

Level 2

Adjust the output level of delay 2.

60

Page 60
Image 60
Roland XV-3080 owner manual 44RING Modulator, 45MULTI TAP Delay

XV-3080 specifications

The Roland XV-3080 is a powerful and versatile sound module that has become a favorite among musicians, producers, and composers since its release in the late 1990s. This module is renowned for its extensive sound library, advanced synthesis capabilities, and user-friendly interface, making it a staple in studios and on stages worldwide.

One of the standout features of the XV-3080 is its impressive range of sounds. It boasts 1,024 preset sounds and 256 user patches, which can be expanded with Roland's SR-JV80 expansion boards to access even more diverse sounds. The XV-3080 is equipped with a Waveform Memory of 128 MB, providing high-quality samples and ensuring rich, detailed sound. The module also features a powerful multitimbral engine, allowing up to 16 simultaneous parts to be played, making it an ideal choice for complex arrangements and live performances.

Another key technology in the XV-3080 is its advanced SuperNATURAL technology. This innovation enhances traditional sample playback by incorporating physical modeling, enabling more expressive and nuanced tones. Musicians can take advantage of features like dynamic layering and velocity-sensitive control, adding an organic quality that is often missing in digital instruments.

The built-in effects processor is another highlight, offering a wide range of high-quality effects, including reverb, chorus, flanger, and distortion. These effects can be applied to individual parts or used globally, allowing for creative sound design and customization. The XV-3080 also supports real-time editing, letting users tweak parameters on the fly, which is particularly useful in live settings.

Connectivity is plentiful on the XV-3080, with MIDI In/Out, as well as digital and analog outputs. This allows for seamless integration with other equipment, whether it's a DAW, a keyboard controller, or an audio interface.

The XV-3080's intuitive interface, featuring a bright LCD screen and a straightforward layout, makes navigating through options quick and easy. Musicians can spend less time fumbling with settings and more time focusing on their music.

In summary, the Roland XV-3080 is a sophisticated sound module that combines cutting-edge technology with user-friendly features. Its extensive sound library, advanced synthesis capabilities, and solid effects processing make it an essential tool for any serious musician or producer looking to create professional-quality music.