Roland XV-3080 owner manual Stereo Delay

Chapter 2 Using the XV-3080 Effects

17: STEREO DELAY

This is a stereo delay.

When Feedback Mode is NORMAL:

Balance D	2-Band
L in		L out
	EQ
Delay	Balance W
Feedback
Feedback
Delay	Balance W
R in	2-Band	R out
	EQ
Balance D
When Feedback Mode is CROSS:
Balance D	2-Band
L in		L out
	EQ
Delay	Balance W
Feedback
Feedback
Delay	Balance W
R in	2-Band	R out
	EQ
Balance D

Delay L (Delay Time Left)

Adjust the time from the original sound until when the left delay sound is heard.

Delay R (Delay Time Right)

Adjust the time from the original sound until when the right delay sound is heard.

Fbk (Feedback Level) #

Adjust the proportion (%) of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase.

Mode (Feedback Mode)

Select the way in which delay sound is fed back into the effect.

NORMAL:The left delay sound will be fed back into the left delay, and the right delay sound into the right delay. CROSS:The left delay sound will be fed back into the right delay, and the right delay sound into the left delay.

Phase L (Feedback Phase Left)

Select the phase of the left delay sound.

NORMAL:Phase is not changed.

INVERT:Phase is inverted.

Phase R (Feedback Phase Right)

Select the phase of the right delay sound.

NORMAL:Phase is not changed.

INVERT:Phase is inverted.

HF Damp

Adjust the frequency above which sound fed back to the effect will be cut. If you do not want to cut the high frequencies of the feedback, set this parameter to BYPASS.

LowGain

Adjust the gain of the low frequency range.

Hi Gain

Adjust the gain of the high frequency range.

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the delay sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the delay sound will be output.

Level (Output Level)

Adjust the output level.

46