Chapter 9 Examples of Applications Using the XV-3080

Changing the Cutoff Frequency (p. 174)

•Cut: Controller number 74

Changing the Resonance(p. 174)

•Res: Controller number 71

Changing the Amount of Internal Chorus/ Reverb (p. 175)

•Chorus: Controller number 93

•Reverb: Controller number 91

Changing the Pitch (p. 175)

•Coarse: Controller number 100 (value is 0), Controller number 101 (value is 2), Controller number 6 (value is 16–112)

•Fine: Controller number 100 (value is 0), Controller number 101 (value is 1), Controller number 6 (value is 32–96), Controller number 38 (value is 0–127)

*When changing the Coarse parameter, set the amount of change in pitch with the Control Number 6 (Data Entry MSB) value. There is no change in pitch when the value is set to “64.” The pitch is raised as the value increases from 64, and is lowered the more the value decreases below 64.

*When changing the Fine parameter, set the amount of change in pitch with the Control Number 6 (Data Entry MSB) and Control Number 38 (Data Entry LSB) settings. There is no change in pitch when Data Entry MSB is set to “64” and Data Entry LSB to “0.” The pitch is raised as the respective values increase, and lowered as the respective values decrease.

Specifying the Range of Pitch Bend (p. 175)

•BendRng: Controller number 100 (value is 0), Controller number 101 (value is 0), Controller number 6 (value is 0– 12)

Procedure

1.Enable the external MIDI device to send a Control Change message.

For example, if you want to change the volume level, set the external MIDI device to send Control Number 7 (Volume message). In this case, the MIDI channel is matched to the MIDI channel of the Part the volume of which you want to change.

*For information on how to make the settings, refer to the owner’s manual for your external MIDI device.

2.Operate the external MIDI device (adjust the controls, play back using the sequencer, etc.) to send the settings.

*Not only is the actual sound played changed, but the values appearing in the display are changed as well.

About RPN

“RPN” (Registered Parameter Number) is an extension message prepared by Control Change message.

Use RPN when using an external MIDI device to change the XV-3080’s Pitch or Pitch Bend range settings. An RPN has an superior part (RPN MSB) and a subordinate part (RPN LSB). The RPN MSB (Control Number 101) informs the XV-3080 that a setting using RPN is to follow, and the RPN LSB (Control Number 100) value tells the which parameter is to be set. Lastly, the Data Entry (Control Change 6) value sets the degree of change.

Once the XV-3080 has been received an RPN parameter, all further Data Entry messages on that MIDI channel are considered to apply to that parameter. In order to prevent accidents, when the desired setting has been made for the parameter, it is recommended that RPN be set to Null.

For example, to raise the pitch of a certain Part by one half-step (semitone) send the following Control Change message from the external MIDI device.

•Controller number 100: value “0”

•Controller number 101: value “2”

•Controller number 6: value “65”

•

Controller number 100: value “127” ←

RPN null

•

Controller number 101: value “127” ←

RPN null

For more detailed information about RPN, please refer to the “MIDI Implementation” (p. 173).

Chapter 9

139

Page 138 Page 140
Page 139
Image 139
Roland XV-3080 owner manual 139
Page 138 Page 140

XV-3080 specifications

The Roland XV-3080 is a powerful and versatile sound module that has become a favorite among musicians, producers, and composers since its release in the late 1990s. This module is renowned for its extensive sound library, advanced synthesis capabilities, and user-friendly interface, making it a staple in studios and on stages worldwide.

One of the standout features of the XV-3080 is its impressive range of sounds. It boasts 1,024 preset sounds and 256 user patches, which can be expanded with Roland's SR-JV80 expansion boards to access even more diverse sounds. The XV-3080 is equipped with a Waveform Memory of 128 MB, providing high-quality samples and ensuring rich, detailed sound. The module also features a powerful multitimbral engine, allowing up to 16 simultaneous parts to be played, making it an ideal choice for complex arrangements and live performances.

Another key technology in the XV-3080 is its advanced SuperNATURAL technology. This innovation enhances traditional sample playback by incorporating physical modeling, enabling more expressive and nuanced tones. Musicians can take advantage of features like dynamic layering and velocity-sensitive control, adding an organic quality that is often missing in digital instruments.

The built-in effects processor is another highlight, offering a wide range of high-quality effects, including reverb, chorus, flanger, and distortion. These effects can be applied to individual parts or used globally, allowing for creative sound design and customization. The XV-3080 also supports real-time editing, letting users tweak parameters on the fly, which is particularly useful in live settings.

Connectivity is plentiful on the XV-3080, with MIDI In/Out, as well as digital and analog outputs. This allows for seamless integration with other equipment, whether it's a DAW, a keyboard controller, or an audio interface.

The XV-3080's intuitive interface, featuring a bright LCD screen and a straightforward layout, makes navigating through options quick and easy. Musicians can spend less time fumbling with settings and more time focusing on their music.

In summary, the Roland XV-3080 is a sophisticated sound module that combines cutting-edge technology with user-friendly features. Its extensive sound library, advanced synthesis capabilities, and solid effects processing make it an essential tool for any serious musician or producer looking to create professional-quality music.
Top Page Image Contents