Chapter 2 Using the XV-3080 Effects

Res (Phaser Resonance)

Adjust the amount of feedback for the phaser. Higher settings will give the sound a stronger character.

X-Fbk (Cross Feedback Level)

Adjust the proportion (%) of the phaser sound that is to be returned to the input. Positive (+) settings will return the signal to the input with the original phase, while negative (-) settings produce an inverted phase.

Step Rate (Step Rate Switct/Step Rate #)

Adjust the frequency of pitch change.

This setting determines whether the pitch is changed in a stepped fashion (ON) or not (OFF).

Mix (Mix Level)

Adjust the volume of the phase-shifted sound, relative to the direct sound.

Low Gain

Adjust the low frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the low frequency range.

Hi Gain

Adjust the high frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the high frequency range.

Level (Output Level)

Adjust the output level.

42:KEYSYNC FLANGER

Keysync FLanger controls the Flanger by resetting the effect at the volume of the sound input to the effects device, restarting from the same pitch each time the Flanger is reset.

This parameter lets your playing dynamics on the keyboard control the flanger effect.

L in

2-Band

L out

EQ

 

 

 

Flanger

 

 

Feedback

 

 

Feedback

 

 

Flanger

 

R in

2-Band

R out

EQ

 

 

Pre Dly (Pre Delay Time)

Adjust the time delay from the original sound until the flanger sound is heard.

Rate (LFO Rate) #

Adjust the modulation frequency of the flanger sound.

Depth (LFO Depth)

Adjust the modulation depth of the flanger sound.

Fbk (Feedback) #

Adjust the proportion (%) of the flanger sound that is to be returned to the input. Positive (+) settings will return the signal to the input with the original phase, while negative (-) settings produce an inverted phase. Higher settings will produce a more distinctive sound.

Phase 0–180 [deg]

Adjust the spaciousness of the flanger sound.

Filter (Filter Type)

OFF:A filter will not be used.

LPF:he frequency region above the Cutoff Freq setting will be cut.

HPF:The frequency region below the Cutoff Freq setting will be cut.

Cutoff(Cutoff Frequency)

Sets the cutoff frequency when a specific frequency band is cut off by a filter.

Step Rate (Step Rate Switct/Step Rate #)

Adjust the frequency of pitch change.

This setting determines whether the pitch is changed in a stepped fashion (ON) or not (OFF).

58

Page 57 Page 59
Page 58
Image 58
Roland XV-3080 owner manual 42KEYSYNC Flanger
Page 57 Page 59

XV-3080 specifications

The Roland XV-3080 is a powerful and versatile sound module that has become a favorite among musicians, producers, and composers since its release in the late 1990s. This module is renowned for its extensive sound library, advanced synthesis capabilities, and user-friendly interface, making it a staple in studios and on stages worldwide.

One of the standout features of the XV-3080 is its impressive range of sounds. It boasts 1,024 preset sounds and 256 user patches, which can be expanded with Roland's SR-JV80 expansion boards to access even more diverse sounds. The XV-3080 is equipped with a Waveform Memory of 128 MB, providing high-quality samples and ensuring rich, detailed sound. The module also features a powerful multitimbral engine, allowing up to 16 simultaneous parts to be played, making it an ideal choice for complex arrangements and live performances.

Another key technology in the XV-3080 is its advanced SuperNATURAL technology. This innovation enhances traditional sample playback by incorporating physical modeling, enabling more expressive and nuanced tones. Musicians can take advantage of features like dynamic layering and velocity-sensitive control, adding an organic quality that is often missing in digital instruments.

The built-in effects processor is another highlight, offering a wide range of high-quality effects, including reverb, chorus, flanger, and distortion. These effects can be applied to individual parts or used globally, allowing for creative sound design and customization. The XV-3080 also supports real-time editing, letting users tweak parameters on the fly, which is particularly useful in live settings.

Connectivity is plentiful on the XV-3080, with MIDI In/Out, as well as digital and analog outputs. This allows for seamless integration with other equipment, whether it's a DAW, a keyboard controller, or an audio interface.

The XV-3080's intuitive interface, featuring a bright LCD screen and a straightforward layout, makes navigating through options quick and easy. Musicians can spend less time fumbling with settings and more time focusing on their music.

In summary, the Roland XV-3080 is a sophisticated sound module that combines cutting-edge technology with user-friendly features. Its extensive sound library, advanced synthesis capabilities, and solid effects processing make it an essential tool for any serious musician or producer looking to create professional-quality music.
Top Page Image Contents