Chapter 3 Selecting Output Jacks

PERFORM CHO OUT ([PERFORM]- [EFFECTS])

Output Assign (Chorus Output Assign) A/B/C

This setting selects the pair of OUTPUT jacks to which the Chorus unit’s stereo output is routed when Chorus Output Select is set to “MAIN” or “MAIN+R.”

Level (Chorus Level) 0–127

This setting determines the Chorus output level.

Select (Chorus Output Select)

This parameter allows you to send the Chorus output directly to the currently selected OUTPUT jacks, to the Reverb, or to both.

MAIN: The Chorus output is sent only to the OUTPUT jacks.

REV: The Chorus output is sent only to the Reverb.

MAIN+R: The Chorus output is sent to the OUTPUT jacks and to the Reverb.

PERFORM REV OUT ([PERFORM]- [EFFECTS])

Output Assign (Reverb Output Assign) A/B/C

This specifies the OUTPUT jacks to which the Reverb unit’s

stereo output is routed.

Level (Reverb Level) 0–127

This setting determines the Reverb output level.

SYSTEM SETUP ([SYSTEM]-[COMMON])

Master Level 0–127

This adjusts the volume of the entire XV-3080.

Mix/Parallel

MIX: All Parts – including those routed to OUTPUTs B/C or INDIVIDUAL 3–6 – are mixed together and routed to the A(MIX) OUTPUT jacks.

This setting allows you to quickly route everything through headphones when you are creating sounds, or to combine all of your sounds into two outputs when sending the XV-3080’s signal to a mixer that has only two channels.

*When MIX is selected, sounds routed to the INDIVIDUAL 3/ 5 jacks are sent to the left A(MIX) OUTPUT jack, and sounds routed to the INDIVIDUAL 4/6 jacks are sent to the right A(MIX) OUTPUT jack.

PARALLEL: Sounds are routed to output jacks according to their output settings.

*The XV-3080’s Master Level and Mix/Parallel settings are each established using a single global parameter.

Example of Settings

Selecting Different Output Destinations for Parts in a Performance

This example describes the procedure for outputting Part 1 from the A(MIX) OUTPUT jacks without sending it through any internal effects, sending Part 2 through the Multi-Effects and then outputting it from the B OUTPUT jack, and outputting Part 3 from the INDIVIDUAL 5 OUTPUT jack without sending it through any internal effects.

First, set Part 1.

1.Select the Performance you wish to use.

2.Press [EFFECTS] so that its indicator lights.

3.Press [ ] / [ ] to select the PART OUTPUT page.

4.Press PART SELECT [1/9] to make its indicator light.

*Make sure that the [1-8/9-16] button’s indicator is not lit. If the indicator is lit, press [1-8/9-16] to turn it off.

5.Press [ ] / [ ] to move the cursor to Output Assign.

6.Turn the VALUE dial or press [INC] / [DEC] to select

OUTPUT A.

7.Press [ ] / [ ] to move the cursor to Chorus.

8.Turn the VALUE dial to select 0.

9.Set the Part’s Reverb send to 0 by repeating Steps 7 and 8, selecting Reverb in Step 7.

Next, set up Part 2.

1.Press PART SELECT [2/10] to make its indicator light.

76

Page 76
Image 76
Roland XV-3080 Perform CHO OUT PERFORM- Effects, Perform REV OUT PERFORM- Effects, First, set Part, Next, set up Part

XV-3080 specifications

The Roland XV-3080 is a powerful and versatile sound module that has become a favorite among musicians, producers, and composers since its release in the late 1990s. This module is renowned for its extensive sound library, advanced synthesis capabilities, and user-friendly interface, making it a staple in studios and on stages worldwide.

One of the standout features of the XV-3080 is its impressive range of sounds. It boasts 1,024 preset sounds and 256 user patches, which can be expanded with Roland's SR-JV80 expansion boards to access even more diverse sounds. The XV-3080 is equipped with a Waveform Memory of 128 MB, providing high-quality samples and ensuring rich, detailed sound. The module also features a powerful multitimbral engine, allowing up to 16 simultaneous parts to be played, making it an ideal choice for complex arrangements and live performances.

Another key technology in the XV-3080 is its advanced SuperNATURAL technology. This innovation enhances traditional sample playback by incorporating physical modeling, enabling more expressive and nuanced tones. Musicians can take advantage of features like dynamic layering and velocity-sensitive control, adding an organic quality that is often missing in digital instruments.

The built-in effects processor is another highlight, offering a wide range of high-quality effects, including reverb, chorus, flanger, and distortion. These effects can be applied to individual parts or used globally, allowing for creative sound design and customization. The XV-3080 also supports real-time editing, letting users tweak parameters on the fly, which is particularly useful in live settings.

Connectivity is plentiful on the XV-3080, with MIDI In/Out, as well as digital and analog outputs. This allows for seamless integration with other equipment, whether it's a DAW, a keyboard controller, or an audio interface.

The XV-3080's intuitive interface, featuring a bright LCD screen and a straightforward layout, makes navigating through options quick and easy. Musicians can spend less time fumbling with settings and more time focusing on their music.

In summary, the Roland XV-3080 is a sophisticated sound module that combines cutting-edge technology with user-friendly features. Its extensive sound library, advanced synthesis capabilities, and solid effects processing make it an essential tool for any serious musician or producer looking to create professional-quality music.