Chapter 9 Examples of Applications Using the XV-3080

Sns: This adjusts the amount of change that will occur in response to controller movements. Negative (-) values invert the change. For example, with LFO Depth, the phase is reversed when a negative Sens value is selected. With LFO Rate, setting Sens to a negative value increases the cycle length, slowing down the LFO, while setting it to positive value shortens the cycle, speeding it up.

Tone: This selects the Tone to be controlled using the two previous parameter settings. “*” activates the control of a Tone, “*” de-activates it, and “R” reverses the (+) or (-) characteristic of the change being applied.

Applications for Patches

Syncing the LFO Cycle to System Tempo

1.Select the Patch you wish to synchronize on the PATCH PLAY page.

2.Set the Clock Source parameter (PATCH TEMPO page ([PATCH]-[COMMON])) to SYSTEM.

3.Set the beat length of the RATE (LFO 1, 2 WAVE page ([PATCH]-[LFO)) of each Tone to match the System Tempo. This establishes a 1:1 relationship between the LFO Rate and System Tempo. If, for example, you wanted the LFO Rate to always be twice the speed of the System Tempo, you would set its Rate to a value that is twice the value of the System Tempo.

4.Set the Clock Source parameter (SYSTEM SETUP page (SYSTEM]-[SETUP)) to INT.

*When the Clock Source parameter is set to MIDI, you can synchronize the LFO cycle to an external MIDI device.

5.If the System Tempo (SYSTEM SETUP page (SYSTEM]- [SETUP)) changes, the LFO Rate changes along with it.

6.Set the modulation depth as desired using LFO DEPTH1:2 page ([PATCH]-[LFO]) for each Tone.

Modifying Multi-Effects to Match the System’s Tempo

You can modify Multi-Effects parameter values in time with the System Tempo when you have selected the following values for the Type MFX parameter.

Type

MFX Parameter

16: STEP-FLANGER

Step Rate

19: TRIPLE-TAP-DELAY

Delay L–R

20: QUADRUPLE-TAP-DELAY

Delay 1–4

Here is an example in which STEP-FLANGER is used for the Multi-Effects.

1.Select a Patch on the PATCH PLAY page.

2.Set its Clock Source (PATCH TEMPO page ([PATCH]- [COMMON])) to SYSTEM.

3.Make sure that Type (PATCH MFX TYPE page ([PATCH]-[EFFECTS])) is set to STEP-FLANGER. If not, reset it so that it is.

4.Make sure that Step Rate (PATCH MFX TYPE page ([PATCH]-[EFFECTS])) is set to a note – not a numerical

– value. If necessary, reset it so that it is.

5.Set Clock Source (SYSTEM SETUP page (SYSTEM]- [SETUP)) to INT.

*When Clock Source is set to MIDI, you can synchronize the Multi-Effect to the tempo of an external MIDI device.

6.When the System Tempo (SYSTEM SETUP page (SYSTEM]-[SETUP)) changes, the STEP-FLANGER’s Step Rate will change along with it.

Making a Tone’s Delay Time Match the System Tempo

1.Select a Patch on the PATCH PLAY page.

2.Set Clock Source (PATCH TEMPO page ([PATCH]- [COMMON])) to SYSTEM.

3.Set Time (PATCH/WAVE/TONE DELAY) to a note length – not a numerical value – in relation to the synchronization tempo.

4.Set Clock Source (SYSTEM SETUP page (SYSTEM]- [SETUP)) to INT.

*When Clock Source is set to MIDI, you can synchronize the Tone’s delay to the tempo of an external MIDI device.

5.When the System Tempo (SYSTEM SETUP page (SYSTEM]-[SETUP)) changes, the Tone’s delay time changes along with it.

Chapter 9

137

Page 136 Page 138
Page 137
Image 137
Roland XV-3080 owner manual Applications for Patches, Syncing the LFO Cycle to System Tempo
Page 136 Page 138

XV-3080 specifications

The Roland XV-3080 is a powerful and versatile sound module that has become a favorite among musicians, producers, and composers since its release in the late 1990s. This module is renowned for its extensive sound library, advanced synthesis capabilities, and user-friendly interface, making it a staple in studios and on stages worldwide.

One of the standout features of the XV-3080 is its impressive range of sounds. It boasts 1,024 preset sounds and 256 user patches, which can be expanded with Roland's SR-JV80 expansion boards to access even more diverse sounds. The XV-3080 is equipped with a Waveform Memory of 128 MB, providing high-quality samples and ensuring rich, detailed sound. The module also features a powerful multitimbral engine, allowing up to 16 simultaneous parts to be played, making it an ideal choice for complex arrangements and live performances.

Another key technology in the XV-3080 is its advanced SuperNATURAL technology. This innovation enhances traditional sample playback by incorporating physical modeling, enabling more expressive and nuanced tones. Musicians can take advantage of features like dynamic layering and velocity-sensitive control, adding an organic quality that is often missing in digital instruments.

The built-in effects processor is another highlight, offering a wide range of high-quality effects, including reverb, chorus, flanger, and distortion. These effects can be applied to individual parts or used globally, allowing for creative sound design and customization. The XV-3080 also supports real-time editing, letting users tweak parameters on the fly, which is particularly useful in live settings.

Connectivity is plentiful on the XV-3080, with MIDI In/Out, as well as digital and analog outputs. This allows for seamless integration with other equipment, whether it's a DAW, a keyboard controller, or an audio interface.

The XV-3080's intuitive interface, featuring a bright LCD screen and a straightforward layout, makes navigating through options quick and easy. Musicians can spend less time fumbling with settings and more time focusing on their music.

In summary, the Roland XV-3080 is a sophisticated sound module that combines cutting-edge technology with user-friendly features. Its extensive sound library, advanced synthesis capabilities, and solid effects processing make it an essential tool for any serious musician or producer looking to create professional-quality music.
Top Page Image Contents