Save menu

UltraMatrix version MX21C Rose Electronics Copyright 1990-2002

Main Menu

Configure

System

Computer

KVM

User

Profile

Group

Language

Status

Save

Exit

Boards to update = 3

Save configuration?

NO

YES

Use up/down arrow keys to choose selection then press the Enter key or the Escape key to exit

Configure password,box number,keyboards settings,appearance

Figure 15. Save menu

When changes are made to any configuration, they must be saved in flash memory to insure that the changes will be active after a power cycle. It is recommended that all users be logged off from all systems prior to saving any configuration changes. To save the settings, select save and press [Enter]. The UltraMatrix will check and display how many CPU cards in the system to update. This is the total number of CPU cards (RS232 ports) in the system not counting the one the KVM station is connected to. (Total boards – 1)

A YES/NO selection box will display. Choose “YES” to save the changes to flash memory on all powered-on UltraMatrix switches.

Choose “NO” for temporary or incorrect changes. The temporary settings will only be in effect as long as power is applied to the Unit. Once power is cycled, unsaved changes, other than the starting computer number, are lost and the previously saved configuration settings will be effective.

44ULTRAMATRIX E-SERIES MANUAL

Page 50
Image 50
Rose electronic 2xE manual Save menu, Yes