Rotel RR-1060 manual Secondary Command Buttons, Multi-Step Buttons, Setup Button

14RR-1060

At the bottom right are nine buttons that dupli- cate the cursor functions for cable or satellite TV receiver or audio/video components plus four round buttons are for extra functions, such as Last Channel, Viewing Guide, etc.

At the bottom left are five oval buttons that dupli- cate the basic transport control functions (Play, Fast Forward, Pause, etc.) of a CD player, DVD player or video tape recorder.

NOTE: The numeric buttons, 0 – 9, are also avail- able for sending Smart Macros.

Secondary Command Buttons

Under the folding cover is a group of buttons which provide secondary command functions. Open the folding cover to access these buttons.

The function of these buttons varies depending on the device selected with the DEVICE/INPUT buttons. For example, the top two rows have com- mands for A/V receivers (see labels printed on the buttons) or commands for CD players (see la- bels printed above and below the buttons). The two rows below these have commands for A/V receivers (see labels printed on the buttons) or commands for DVD players and VCRs (see labels printed above and below the buttons). The bottom two rows of buttons include commands for TVs.

Multi-Step Buttons

In addition to normal functions, the five buttons labeled SCAN, PTY, P-TUN, TP and TA provide a special option – learning up to three commands on a single button from another remote. The first command is sent when the button is pressed once, the second command is sent the next time the but- ton is pressed, and the third command is sent the third time the button is pressed. See the Learning Multi-Step Buttons section for information.

Setup Button

The SETUP button in the lower right corner under the folding cover, is used to enter the setup mode for programming, learning, relabeling, storing macros, and other configuration functions.