Rotel RR-1060 manual Disabling the Beep Tone, Clone Function

31

Disabling the Beep Tone

As shipped from the factory, the RR-1060 beeps as confirmation whenever a button is pressed. This feature can be disabled or enabled as follows:

1.Press the SETUP button (the LCD displays SET- UP).

2.Press the UP/DOWN cursor buttons until BEEP SOUND appears in the display. Press the ENT button to confirm.

3.Press the UP/DOWN cursor buttons until BEEP ON or BEEP OFF appears in the display. Press the ENT button to select the desired option.

Clone Function

The CLONE function transfers all programming, learned commands, labels, and settings from one RR-1060 to a second RR-1060. To transfer the programming, place two RR-1060 remotes with their IR windows facing each other about 2 to 3 inches apart, then proceed as follows.

On the remote that will be receiving the data:

1.Press the SETUP button.

2.Press the UP/DOWN cursor buttons until CLONE appears in the display. Press the ENT button to confirm.

3.Press the UP/DOWN cursor buttons until RE- CEIVE appears in the display. Press the ENT button.

On the remote that will be sending the data:

1.Press the SETUP button (the LCD displays SET- UP).

2.Press the UP/DOWN cursor buttons until CLONE appears in the display. Press the ENT button to confirm.

3.Press the UP/DOWN cursor buttons until SEND appears in the display. Press the ENT button.