26
7.A confirmation appears in the LCD. Use the UP/DOWN buttons to select either YES (to change the command) or NO (to discard the changes). Press ENT to confirm.
NOTE: If you attempt to change an unprogrammed Smart Macro button, the word EMPTY appears and the remote returns to normal mode.
Clearing learned commands
You can clear a single learned command, a multi- step command, all of the learned commands for a single DEVICE/INPUT button, or all of the learned commands for all DEVICE/INPUT buttons:
Clearing a Single Learned Command
1.Press the DEVICE/INPUT button where the learned command is stored.
2.Press the SETUP button (the LCD displays SET- UP). Press the UP/DOWN cursor buttons un- til EDIT appears in the display. Press the ENT button to confirm.
3.Press the UP/DOWN cursor buttons until CLEAR ONE KEY appears in the display. Press the ENT button to confirm.
4.When the SELECT KEY prompt is displayed, press the command button you wish to clear.
5.A confirmation message appears in the LCD. Use the UP/DOWN buttons to select either YES (to clear the learned command) or NO (to keep command). Press the ENT button to confirm.
Clearing All Learned Commands for a DEVICE/INPUT Button 
1.Press the DEVICE/INPUT button where the learned command is stored.
2.Press the SETUP button (the LCD displays SET- UP). Press the UP/DOWN cursor buttons un- til EDIT appears in the display. Press the ENT button to confirm.
