Rotel RR-1060 manual Programming by Brand Name

18RR-1060

1.Press the DEVICE/INPUT button where you wish to program this component’s code (AUD, CD, TUN, TAPE and V1–V5).

2.Press the SETUP button (the LCD displays SET- UP). Press the ENT button to confirm.

3.Press the UP/DOWN cursor buttons until SET- UP MODEL appears in the display. Press the ENT button to confirm.

4.Press the UP/DOWN cursor buttons until the type of component you are searching for ap- pears in the display (AUD, DVD, CD) Press the ENT button to confirm. The first available model number appears in the display.

5.Use the UP/DOWN cursor buttons to scroll through the list until the desired model number appears. Press ENT to confirm the selection.

6.Press any COMMAND button to test the new code. For example, when programming a CD player, you could push the PLAY button to see if the disc begins play. If the command works, press ENT to save the the code selection and return to normal operation.

NOTE: You can press the SETUP button to exit the programming at any time.

Programming by Brand Name

You can also use the following search method to find and test the code numbers available for your brand of component. When using the brand

search, the DEVICE/INPUT buttons can only be programmed for specific types of components as follows:

AUD: Rotel audio components only

CD: CD players only

TUN: Any component

TAPE: Any component

V1: DVD only

V2: Any component

V3: Any component

V4: Any component

V5: Any component