Rotel RR-1060 manual Programming by 4-Digit Code

20RR-1060

Programming by 4-Digit Code

Find your audio/video component in the 4-digit code list. Then proceed as follows:

1.Press the DEVICE/INPUT button where you wish to program this component’s codes (AUD, CD, TUN, TAPE and V1–V5).

2.Press the SETUP button (the LCD displays SET- UP). Press the ENT button to confirm.

3.Press the UP/DOWN cursor buttons until SET- UP CODE appears in the display. Press the ENT button to confirm.

4.Input the 4-digit code using the 0–9 buttons. Upon entering a valid code, the phrase CODE OK will be shown. If the code is not valid, the LCD will show CODE INVALID.

5.Once a valid code has been entered, test the code by sending pressing any COMMAND button. For example, when testing a DVD code, you could press the PLAY button. If the code works, skip to the next step. If the code does not work properly, repeat the procedure from step 4, using the next 4-digit code listed for the brand of component.

6.Press the SETUP button to exit to programming mode.