Rotel RR-1060 manual Custom Labels, Clearing All Learned Commands for ALL DEVICE/INPUT Buttons

27

3.Press the UP/DOWN cursor buttons until CLEAR ONE DEV appears in the display.

4.Press the ENT button to delete all learned com- mands for the DEVICE/INPUT button.

Clearing All Learned Commands for ALL DEVICE/INPUT Buttons

1.Press the SETUP button (the LCD displays SET- UP). Press the UP/DOWN cursor buttons un- til EDIT appears in the display. Press the ENT button to confirm.

2.Press the UP/DOWN cursor buttons until CLEAR ALL DEV appears in the display.

3.Press the ENT button to delete all learned com- mands for all DEVICE/INPUT buttons.

Custom Labels

Whenever you press a button on the RR-1060, its name appears in the display. By default, the labels appearing in the LCD when a button is pressed match the printed labels for each button. There are two complete sets (“pages”) of labels stored in the RR-1060. You can switch between the two. The first page of labels cannot be changed. The labels for the second page can be customized. This allows you to return to the default labels at any time by switching back to the first page.

Switching between two pages of labels

1.Press the SETUP button.

2.Press the UP/DOWN cursor buttons until MULTI LANGUAGE appears in the display. Press the ENT button to confirm.

3.Press the UP/DOWN cursor buttons until the desired set of labels (PAGE 1 or PAGE 2) ap- pears in the display. Press the ENT button to confirm the selection.