Rotel RR-1060 manual Folding Cover, Device/Input Buttons

12RR-1060

Folding Cover

A folding cover conceals the buttons at the bot- tom of the RR-1060. These buttons provide extra command functions. Leave the folding cover in the closed position to simplify the RR-1060 for routine use. Open the cover to access the addi- tional buttons.

Device/Input Buttons

Two rows of buttons on the folding cover (AUD, CD, TUN, TAPE, EXT and V1–V5) are used to se- lect a component for control by the remote and, if desired, to activate the input for the component you are operating. How long the button is pressed determines whether a device is selected just for control by the remote or whether that input on the A/V receiver or surround sound processor is also activated.

To change the remote DEVICE only, press the button briefly (less than one second). This does not change the input selection.

To change the remote DEVICE and the in- put selection on the A/V receiver, press and hold the button for more than one second.

When a DEVICE/INPUT button is pressed, the label for that button appears in the LCD display. These labels can be customized, if desired. See the Labeling DEVICE/INPUT Buttons section of the manual for instructions.

The AUD button is pre-programmed to operate Ro- tel A/V receivers and surround sound processors. The V1 button is pre-programmed to operate Rotel DVD players. The CD button is pre-programmed to operate Rotel CD players.All other buttons are unprogrammed and can be used to learn the con- trol codes of other remote controls.

The control codes of the AUD and V1 buttons can also be reprogrammed for other control codes. If you do so, you can restore the original Rotel control codes for these buttons. See the Restoring Factory Defaults section of this manual.

NOTE: The DEVICE/INPUT buttons are also used in programming the RR-1060 and are available for storing and sending Smart Macros (automatic sequences of up to 20 learned commands).