Runco CL-810 manual Controls and Functions, Control Panel

Controls and Functions

Control Panel

1.LAMP LED

Indicates the status of the lamp

-Red when the lamp has exceeded its usage life or developed a problem. Please contact your Runco Dealer for assistance.

-Flashing Red when the fans are not working or the lamp cover is open. Please contact your Runco Dealer for assistance.

2.POWER LED

Indicates the status of the power

-Orange when the AC power cord is plugged into a wall outlet (standby mode). Once in standby mode, you can turn on the projector by pressing the ON button on the remote control.

-Green when the power is turned on (operational mode).

-Flashing Orange for the first 45 seconds after power-up indicating that the lamp is warming up.

-Flashing Green for 110 seconds after the projector was powered off indicating that the lamp is cooling down.

3.TEMP LED

Indicates the status of the fans and internal temperature

-Red when the internal temperature is too high. Please contact your Runco Dealer for assistance.

-Flashing Red when the fans are not working or the lamp cover is open. Please contact your Runco Dealer for assistance.

4.TOP IR SENSOR

Runco CL-810 Owner’s Operating Manual 13