Runco LS-10D operation manual 2.2 LS-10d Rear Panel, 3. LS-10d Rear Panel 1. DHD INPUT, Trigger

Controls and Functions

2.2

LS-10d Rear Panel

Figure 2-5shows the LS-10d rear panel.

1 2 3

Figure 2-3. LS-10d Rear Panel

1.DHD INPUT

An HDCP-compliant digital video input for connecting the HDMI output from the DHD Controller.

2.TRIGGER 1

Provides 12 (+/- 1.5) volt switched output for an anamorphic lens transport (if installed) with 250mA current capacity and short protection.

Note	You can also use a 12-volt trigger output on the DHD Controller to
	control the anamorphic lens transport.

3.POWER INPUT (100 to 240 VAC) Connect the LS-10d to power here.

Note	The other connectors are not used. Connect all signal sources and
	other equipment to the DHD Controller.

8 Runco LS-10d Installation/Operation Manual