Runco LS-10D 4. DHD Controller Front Panel 1. RUNCO ICON, Ir Sensor, 4. ON/STANDBY BUTTON

Controls and Functions

Figure 2-4shows the controls and indicators on the DHD Controller front panel; the paragraphs that follow describe them.

11 10 9

2.3

DHD Controller Front Panel

4

LS-10d HDMI 1

16:91080i/60

standby

i n p

u t

ra tio
nt	er
e
ratio

i n p u t

m

e n u

1 2 3 4 5 6 7 8

Figure 2-4. DHD Controller Front Panel

1.RUNCO ICON

Lights blue to indicate that the controller is on or powering up.

2.IR SENSOR

Receives IR commands from the remote control.

3.VACUUM FLUORESCENT DISPLAY

Can be used instead of the On-Screen Display (OSD). Displays currently-selected menu or – if no menu is selected – the connected display device model, current source, input resolution and aspect ratio.

4.ON/STANDBY BUTTON

Press once to toggle from standby mode to on mode. Press it again to return to standby mode. For a discrete on or off command, you can use the direct access buttons on the remote control.

5.LEFT BUTTON

Used to direct-select inputs or move the menu cursor left in the OSD. When no menu is present on-screen, the LEFT button toggles through the different sources, in this order:

HDMI 4 - HDMI 3 - HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 - Component - Composite 3 - Composite 2 - Composite 1

6.DOWN BUTTON

Use to direct-select aspect ratios or move the menu cursor down in the OSD. When no menu is present on-screen, this button toggles through the different aspect ratios, in this order:

16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema - Native

Runco LS-10d Installation/Operation Manual 9