Operation
If you prefer to do this manually, set it to Off. The DHD Controller will ask if you want to perform the upgrade the next time it is
•Check For New Firmware: To have the DHD Controller check for new firmware on demand (and perform an upgrade if it finds a new version), select Check For New Firmware from the Auto Firmware Upgrade menu. If the DHD Controller finds a new firmware version, select Yes to perform the upgrade or No to return to the previous menu.
•
The notification messages are in the following format:
To:
From:
Subject: [Type of notification] from Runco DHD4 Body:
This is an automated message sent from the Runco DHD4:
Notification: | [One of the following: |
| “DHD Error” / “Display Error” |
| “Periodic Service Notification” |
| “Lamp Life Notification” / “Calibration Data”] |
Detailed Description: [ If a DHD Error, one of the following: “Fan Failure 1” / “Fan Failure 2” “Overtemp 1” / “Overtemp 2” “Initialization Failure”
| If a Display Error, a |
| error message such as “Lamp Door Open” |
| If a Periodic Service Notification, the elapsed |
| time since the last notification |
| If a Lamp Life Notification, the number of hours |
| the lamp has been in service |
| If a Calibration Data message, |
Serial Number: | “See Attached File” ] |
[DHD Controller serial number] |
Customer Information: [From “Customer Information“
Best Regards,
Runco International, LLC 1195 NW Compton Drive Beaverton, OR 97006
•
Runco | 67 |
