Runco LS-10D operation manual Installing the Optional Anamorphic Lens Mount, Other Considerations

Installation

Other considerations and tips that can help improve your installation:

•Keep the ambient temperature constant and below 35°C (95°F). Keep the projector away from heating and/or air conditioning vents. Changes in temperature may cause drifts in the projector circuitry, which may affect performance.

•Keep the projector away from devices that radiate electromagnetic energy such as motors and transformers. Common sources of these include slide projectors, speakers, power amplifiers and elevators.

If you are installing a standard LS-10d (without an anamorphic lens), skip this step and proceed with Mounting the LS-10d(page 28).

If you are installing an LS-10d with an anamorphic lens, proceed as follows to install the lens mount and transport assembly.

Other Considerations

3.4

Installing the Optional Anamorphic Lens Mount

Note	1. Do not install the anamorphic lens yet, only the lens mount and
	transport assembly. You will install the anamorphic lens after you
	install the projector and adjust the primary lens.
	2. Some components shipped with your projector may differ slightly
	from what is shown in these instructions.
The LS-10d Anamorphic lens mount kit consists of the following items. Some		Package Contents

components shipped with your projector may differ slightly from what is shown in these instructions. If any items are missing or damaged, please contact your Runco dealer or Runco Customer Service at (800) 23RUNCO.

• Transport Assembly Attachment Plate

• Attachment plate hardware (screws, washers and spacers)

• Attachment plate security hooks and related hardware (chain, chain ends, nuts and washers)

•Transport Assembly

•Transport mounting hardware

•Lens bracket mounting hardware

•Power supply

•Remote control unit and batteries

Runco LS-10d Installation/Operation Manual 23