Runco LS-10D operation manual 8. Effect of PCE Hue and Saturation Controls

Operation

0.9
0.8
		Hue
0.7
0.6		Saturation
					Hue
0.5
0.4	Hue
0.3					Saturation			Hue
		Saturation
0.2
0.1
					Hue
	Hue
0
0	0.1	0.2	0.3	0.4	0.5	0.6	0.7	0.8

Figure 4-8. Effect of PCE Hue and Saturation Controls

•White Balance: To precisely adjust the white point associated with the custom color gamut, choose White Balance from the PCE sub-menu. These controls operate identically to the Gain controls in the Display Color menu (described on page 58).

Input Image: The Input Image controls are functionally similar to those in the Picture menu (refer to page 50), but are accessible only by entering the Calibration menu passcode.

The Input Image settings establish the “zero point” for the Picture

Note menu settings, whose values represent offsets from the Input Image settings. For example, if you set Brightness to 10 in this menu, setting Brightness to 10 in the Picture menu results in an actual setting value of 20 (10+10).

62 Runco LS-10d Installation/Operation Manual