Runco LS-10D DHD Controller Rear Panel, Right Button, Menu Button, Up Button, Enter Button, Usb

Controls and Functions

2.4

DHD Controller Rear Panel

7.RIGHT BUTTON

Used to direct-select inputs or move the menu cursor right in the OSD. When no menus are present on-screen, the RIGHT button toggles through the different sources, in this order:

Composite 1 - Composite 2 - Composite 3 - Component - HD 1 - HD 2 - SCART - HDMI 1 - HDMI 2 - HDMI 3 - HDMI 4

8.MENU BUTTON

Press the MENU button to bring up the main menu, or to exit the current menu and return to the previous one.

9.UP BUTTON

Use to direct-select aspect ratios or move the menu cursor up in the OSD. When no menus are present on-screen, the UP button toggles through aspect ratios in the following order:

Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9

10.ENTER BUTTON

When an item is highlighted on the OSD, the ENTER button selects the item.

11.STANDBY LED

Lights amber when the DHD Controller is in standby mode; otherwise it is off.

Figure 2-5shows the rear connector panel on the DHD Controller.

1

2

3

4

5

6

TRIGGERS

USB

RS-232

Display Control

IR

1

2

3

H

V

To Accessory Box

G

B

R

Componeent / SCART

HDMI Out

HDMI 1

HDMI 3

Vi

1

Vi

2

To Display

deo

deo

RS-232

Y	Pb	Pr
G	B	R

H	V	Pb	Pr	Video 3	HDMI 2	HDMI 4	Ethernet	HDMI Out	PC / Control
								Audio Only

7 8 9 10 11 12 13 14 15

Figure 2-5. DHD Controller Rear Panel

1.MAIN POWER SWITCH

Disconnects or applies power to the DHD Controller.

2.TRIGGERS

Connection for up to three (3), 12-volt trigger-controlled devices such as retractable screens or screen masks. Output current is limited to 250 milliamperes (mA).

3.USB

A standard, USB Series “B” connection to a personal computer, for performing software upgrades and other service procedures.

10 Runco LS-10d Installation/Operation Manual