Runco Q-750D operation manual Remove Projector Front Feet

Installation

Remove Projector Front Feet:

Place the projector upside down on a blanket or other soft surface. Loosen and remove the two front feet on the projector.

Remove

Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, these brackets bring the mounting points for the projector mounting plate (included with the projector ceiling mount kit) from the bottom of the projector up and around the AutoScope lens motor housing. For floor installations (where the projector is upright), the adapters allow the projector to lie flat on the mounting surface.

Using six (6) each of the supplied, M6 x 12mm Pan-Head Phillips screws (item #2), attach the AutoScope Ceiling Mount Adapters/Projector Stands (items #3 and #4) to the projector as shown in Figure 3-7.

Q-750d Series Installation/Operation Manual 23