Runco Q-750D operation manual Connections to the Q-750d and DHD Controller, Connector Panel Access

Installation

Proceed as follows to connect the DHD Controller to the Q-750d, your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

To access the connector panel, pull firmly on the cable access cover to open it.

3.6

Connections to the Q-750d and DHD Controller

Connector Panel Access

Digital Video Connection: Connect the HDMI Output of the DHD Controller to the DHD Input of the Q-750d as shown in Figure 3-10.

RS-232

232-RS

DHD INPUT	AC
	AC
INPUT DHD

Connecting the DHD Controller to the Q-750d

HDMI OUT

RS-232

OUT

Figure 3-10. Connecting the Q-750d to the DHD Controller

Q-750d Series Installation/Operation Manual 29