ENGLISH

5THE COFFEE GRINDER (FIG.10)

Caution! Only turn the grinder control knob, found inside the coffee bean container (Fig .10), when the coffee grinder is working and in increments of 2 settings at a time only. Do not insert ground and/or instant coffee in the coffee

bean container.

Do not insert anything other than coffee beans in the container. The coffee grinder contains dangerous moving parts; keep fingers and/or other objects away.

Before carrying out any operations in the coffee bean container, switch OFF the ON/ OFF switch (7) and remove the plug from the wall outlet. Do not insert coffee beans when the coffee grinder is working. Do not use frozen beans.

The quality and the taste of your coffee depend not only on the blend you use, but also on the grinder setting.

The appliance comes with a grinder adjustment knob (Fig.10). To use this feature, turn the graduated knob when the coffee grinder is working and in increments of 2. The numbers displayed on the knob indicate the grinder setting. The manufacturer sets the knob to an average grinder setting at the factory: if the ground coffee is too fine, turn the knob toward the higher numbers; if the ground coffee is too coarse, turn the knob toward the lower numbers.

You will notice the change only after brewing three /four cups of coffee.

Use coffee beans for espresso coffee makers. Avoid using extreme grinder positions (e.g. 1 and 16); if this is necessary, try using different coffee blends.

Store the coffee in a cool and dry place, in an airtight container.

You should change the grinder position if the coffee does not flow optimally, specifically: Too fast = grinding too coarse > grind coffee finer (smaller setting);

Too slow (drips and/or no flow) = grinding too fine > grind coffee coarser (higher setting).

6ADJUSTING THE COFFEE DOSE (FIG.11)

You may select the quantity of coffee beans (dose) that you wish to grind per cup. The manufacturer sets an average dose at the factory.

To change the coffee dose, simply turn the knob (Fig. 11) found inside the coffee bean container. Turn it counterclockwise to increase the dose (towards +) and clockwise to decrease the dose (towards -). The - = 6g and + = 9 g.

You must adjust the dose before pressing the desired coffee button.

This system allows you to obtain an optimal cup of coffee with all types of marketed coffee.

7THE COFFEE DISPENSER

Note: If the appliance does not di- spense coffee, check the water level

in the tank.

Before making coffee, make sure that the green temperature-ready LEDs (23) and (24) are on steady and that the water tank and the coffee bean container are full.

Place 1 or 2 coffee cups under the coffee dispenser spouts; you can adjust the height of the dispenser by moving it up or down manually (Fig.12) to adjust the spouts to your cups.

7.1 Making coffee with coffee beans

To dispense the coffee, press the desired coffee button (23) or (24). The selected button starts flashing (see chap.15), while the other switches off.

To make 1 cup of coffee, position a single cup under the coffee dispenser spouts and press the button (23) or (24) only once; to make 2 cups of coffee or a double shot, position one or two cups under the spouts and press the button (23) or (24) twice in rapid succession.

In this operating mode, the appliance automatically grinds and doses the right quantity of coffee; going through two grinding and dispensing cycles automatically and

• 12 •

Page 12
Image 12
Saeco Coffee Makers SUP 025 PYR manual Adjusting the Coffee Dose, Coffee Dispenser, Making coffee with coffee beans, Tank