dispensing 2 cups of coffee or a double shot.
•Then, the dispensing cycle starts. After carrying out the prebrewing cycle, coffee will start to come out of the spout (Fig.01, pos.13).
The coffee will stop flowing automatically when the preset level is reached (see par.7.3). You can interrupt the flow of coffee by pressing the button (Fig.01, pos.23 or 24).
7.2 Making coffee with preground coffee
In this operating mode, you must use the supplied measuring scoop (Fig.01,
pos.21) to dose the preground coffee.
Only use preground coffee suitable for espresso coffee makers in the doser (5); placing coffee beans, instant coffee and other materials inside the doser
causes damage to the appliance.
Keep fingers away from the preground coffee doser since there
are moving parts.
Use the supplied measuring scoop (21) to measure the right quantity of preground coffee to place in the doser.
Use only one level measuring scoop at a time; to make two cups of coffee using preground, you must go through the entire process twice.
•Press the button (22) to select the preground function, the LED lights up.
•Lift the lid of the preground coffee doser (Fig.13).
•Fill one level scoop of preground coffee; discard any excess quantity of ground coffee.
•Fill the doser with the preground coffee (Fig.14)
•Close the lid of the preground coffee doser.
•To make the coffee, press the desired coffee button
(23)or (24); the selected button starts flashing (see chapter 15), while the other switches off.
•The dispensing cycle begins.
•After carrying out the prebrewing cycle, coffee will start to come out of the spout (13).
The coffee will stop flowing automatically when the preset level is reached (see par. 7.3). You can interrupt the flow of coffee by pressing either coffee button (23) or (24).
•Then the machine automatically returns to the normal operating mode (see par. 7.1).
ENGLISH
7.3Adjusting the quantity of coffee per cup
Your coffee maker has been programmed to make 2 types of coffee: espresso coffee with the button (23) and long coffee with the button (24). To adjust the programmed values to the size of your cups, place the cup under the coffee dispenser (13), press the button of the desired type of coffee (23) or (24) and keep it pressed. Wait for the machine to fill the cup up to the desired level and, then, release the button.
Note: keep coffee button (23) or (24) pressed during the entire coffee dispensing process. Maximum level is 8 oz.
In this way, the appliance is reprogrammed to supply the quantity of coffee you selected.
8DISPENSING HOT WATER
Caution: splashing may occur at the start - scalding hazard! The hot water nozzle can reach high temperatures: avoid
touching directly with your hands.
•Before dispensing hot water, make sure that the hot water button (25) is activated (light will be on steady).
•Proceed as follows when the appliance is ready to dispense hot water:
•Place a cup and/or pitcher under the steam/ hot water nozzle (Fig.15).
•Turn the knob counterclockwise as shown in Fig.15.
•When you have obtained the desired quantity of hot water, turn the knob clockwise to shut off the flow. The appliance is immediately ready to brew coffee.
9 DISPENSING STEAM / PREPARING CAPPUCCINO
Steam can be used to froth milk for cappuccinos and also to heat other
beverages. Scalding hazard!
Splashing may occur at the start - scalding hazard! The hot water nozzle can reach high temperatures: avoid
touching directly with your hands.
