On-Screen Display

Menu

How to adjust

 

 

 

 

D-SUB/BNC(Option)

Use this menu to choose between the signal source connected to the BNC connector input and the signal source connected to the D-SUB connector input. Note: When you are finished, wait for a few seconds and the screen will blank then display the image from the new signal source(other computer).

A cable must be connected to both inputs to use this function.

1Push the Menu ( ) button.

2Push the button or button until the Advanced screen is displayed. Push the button or button to select D-SUB/BNC.

3Push the Menu ( ) button to open the D-SUB/BNC selection screen.

4Use the button or button to select D-SUB or BNC.

Page 77
Image 77
Samsung 757MB manual SUB/BNCOption