Wireless Network Setup

➣The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 113)

➣ If you connect the LAN cable and it supports DHCP, the Internet Protocol		Network Selection : Wireless
		Cable Network Setup
(IP) Settings are automatically configured.	Setup
		Wireless Network Setup	►
➣ The wireless IP sharer to be connected to this product must support DHCP.
		V-Chip

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER button.

4Press the ▲ or ▼ button to select Auto Setup, then press the ENTER button.

➣The Internet Protocol is set automatically.

➣Select Access Point Select to check the network connectivity. (Refer to page 117)

Press the EXIT button to exit.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER button.

Setup

4Press the ▲ or ▼ button to select Manual Setup, then press the ENTER button.

5Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric button to configure the selected item. Press the ENTER button.

➣If you want to use a static IP address, refer to the user manual of your wireless IP sharer.

➣Select Access Point Select to check the network connectivity. (Refer to page 117)

Press the EXIT button to exit.

Wireless Network Setup

Samsung 760 Series user manual Wireless Network Setup, Network Test Access Point Select AP1