Samsung 760 Series user manual Changing Channels

If you want to reset this feature...

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2Press the ENTER button to select Plug & Play. For further details on setting up options, refer to the pages 16~17.

➢ The Plug & Play feature is only available in the TV mode.

Setup	Plug & Play	►
	Language	: English
	Time
	Network Selection	: Cable

Cable Network Setup

Wireless Network Setup

V-Chip

Caption

Plug & Play

Menu Language, Store Demo, Channels, and Time will be set.

OK

Enter Return

Changing Channels

Using the Channel Buttons

1Press the CH or CH button to change channels.

➢When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized.

(The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 20 to memorize channels.

➢To increase the channel number, turn the wheel clockwise when the Channel Display is displayed. To decrease the channel number, turn the wheel counterclockwise.

Using the Number Buttons

1Press the number buttons to go directly to a channel. For example, to select channel 27, press 2, then 7.

The TV will change channels when you press the second number.

➢For quick channel change, press the number buttons, then press the ENTER button.

➢You can press number buttons on Remote control for direct channel access, press the same Number button again to switch between digital and analog TV channels broadcast by the same station.

Using the - Button

The “” button is used to select stations that broadcast a digital signal.

1For example, for Channel 7-1, press 7, then , then 1.

➢HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal.

➢For quick channel change, press the number buttons, then press the ENTER button.

Using the PRE-CH Button to select the Previous Channel

Use the number buttons to quickly tune to any channel.

1Press the PRE-CHbutton. The TV will switch to the last channel viewed.

➢To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CHbutton to quickly alternate between them.

English - 18