Scanning and Switching between Anynet+ Devices

1Press the TOOLS button.

Press the ENTER button to select Anynet+ (HDMI-CEC).

2Press the ▲ or ▼ button to select Device List, then press the ENTER button.

Anynet+ devices connected to the TV are listed.

If you cannot find a device you want, press the red button to scan for devices.

Only when you set Anynet+ (HDMI-CEC)to On in the Setup menu, the Device List menu appears.

3Press the ▲ or ▼ button to select a particular device and press the ENTER button. It is switched to the selected device.

 

 

 

View TV

 

 

Device List

 

 

Recording : DVDR

 

 

DVDR Operation

 

 

Receiver

: On

 

Setup

 

 

 

 

 

Move

Enter

Return

 

 

 

Switchingoperation.to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching

The time required to scan for devices is determined by the number of connected devices.

When the device scan is complete, the number of devices found are not displayed.

Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, press the red button on the remote to search devices.

If you have selected an external device by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an external Anynet+ device by using the TOOLS button.

English - 126

Page 126
Image 126
Samsung 760 Series user manual Scanning and Switching between Anynet+ Devices