Samsung 760 Series user manual Operation, Turning the TV On and Off, Plug & Play Feature

English - 16

Continued...

Operation

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

➢ It may take a little while before you see a full picture.

Plug & Play Feature

The first time you turn on your new TV, choose your basic settings for language, input source and channels, and time of day using the plug and play feature. The TV will store these settings in memory. Storing the channels in memory will allow you to scan the stored channels rather than have to enter their digits each time you want to change channels.

When the TV is initially powered on, basic settings proceed automatically:

1 Press the POWER button on the remote control.			Plug & Play
The message Menu Language, Store Demo, Channels, and Time will be
	Menu Language, Store Demo, Channels, and Time will
set. is automatically displayed.	be set.
2 Press the ENTER button to enter the language.
			OK
Press the ▲ or ▼ button to select language, then press the ENTER button.					Enter
The message Select 'Home Use’ when installing this TV in your home. is			Plug & Play
automatically displayed.
		Select Language of the OSD.
➢ The Screen Saver is activated if there is no remote control key input for
		Menu Language		: English	►
longer than 1 minute while Plug & Play is running.
➢ The Screen Saver is activated if there is no operating signal for longer than					Enter
15 minutes.
			Plug & Play
3 Press the ◄ or ► button to select Store Demo or Home Use, then press the		Select Language of the OSD. English
ENTER button.		Menu Language		Español
				: English
➢ We recommend setting the TV to Home Use mode for the best picture in				Français
your home environment.				Move	Enter
➢ Store Demo mode is only intended for use in retail environments.			Plug & Play
		Select ‘Home Use’ when installing this TV in your
➢ If the unit is accidentally set to Store Demo mode and you want to return
		home.
to Home Use (Standard) mode: Press the Volume button on the TV.
When the volume OSD is displayed, press and hold the MENU button on			Store Demo	Home Use
the TV for 5 seconds.				Move	Enter
4 Press the ▲ or ▼ button to memorize the channels of the selected connection,			Plug & Play
then press the ENTER button.		Select the Antenna source to memorize.
➢ Air: Air antenna signal.		Air			Start
		Cable			Start
Cable: Cable antenna signal.
		Auto			Start
Auto: Air and Cable antenna signals.
➢ In Cable mode, you can select the correct analog signal source among			Move	Enter	Skip
STD, HRC, and IRC by pressing the ◄ or ► button, then press the
			Plug & Play
ENTER button. If you have Digital cable, select the signal source for both		Selects the cable system.
Analog and Digital. Contact your local cable company to identify the type of		Analog	STD	HRC	IRC
cable system that exists in your particular area.
		Digital	STD	HRC	IRC
			Start
			Move	Enter	Skip