Operating to the Long Distance
The Long function is used to Cool /Auto(cool) your room as far as possible. In the Long function, the up/down orientation of air flow and fan speed are selected automatically.
1 If necessary, press the (On/Off) button.
Result: u The power indicator on the control panel comes on. u The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Switched on
Stopped
lt will start up normally after three minutes.
2 Press the button twice.
Result: u The air conditioner cools the room as far as possible.
uThe fan settings are adjusted automatically.
3 To adjust the temperature, press the | buttons one or more times |
until the required temperature is displayed. Possible temperatures | |
are between 18°C and 30°C inclusive. |
|
Result: u Each time you press the | buttons: |
-The temperature is adjusted by 1°C.
-The indoor unit beeps.
4 If you wish to stop the Long function, press the button again.
Result: u The air conditioner is reset automatically to the previous mode, temperature and fan settings.
3 To control the direction of the air flow, refer to page 14.
Note You can't control the airflow direction horizontally in the Long function.
AP50Q1C_IBIM_E |
|
| |
|
| ||
|
| ||
|
|
|
|