Cooling Your Room

You must select the Cool mode if you wish to adjust the :

Cooling temperature

Fan speed when cooling

1 If necessary, press the (On/Off) button.

Result: u The power indicator on the control panel comes on. u The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Switched on

Stopped

lt will start up normally after three minutes.

2 If the is not displayed on the control panel, press the button on the remote control one or more times until it appears.

Result: u The indoor unit beeps each time you press the

button.

u The air conditioner runs in the Cool mode.

Note You can change modes at any time.

3 To adjust the temperature, press the buttons on the remote

control or buttons on the control panel one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive.

Result: u Each time you press the buttons: - The temperature is adjusted by 1°C. - The indoor unit beeps.

u The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature.

uIf the room temperature reaches the set temperature,

the air conditioner stops cooling, but the fan is still operating.

4Select the fan speed by pressing the button on the remote

control or button one or more times until the required setting

is displayed :

Automatic(rotated : )

Low

High Turbo

Result: Each time you press the button, the indoor unit beeps.

5To control the direction of the air flow, refer to page 14.

E-7

AP50Q1C_IBIM_E 32202-2.indd 7

2010-07-14 오후 4:42:04