Selecting the Automatic Operating Mode
You can start the air conditioner in the Automatic mode.
In the Automatic mode, the temperature and the optimum fan speed is selected automatically.
1If necessary, press the 
(On/Off ) button.
Result: u The power indicator on the control panel comes on.
uThe indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Switched on
Stopped
lt will start up normally after three minutes.
2If the 
is not displayed on the control panel, press the 
button on the remote control one or more times until it appears.
Result: u The indoor unit beeps each time you press the
button.
u The air conditioner runs in the Auto mode.
Note u You can change modes at any time.
u If the indoor temperature is higher than 21°C, the air conditioner operates in the Cool mode. If the indoor temperature is lower than 21°C, the air conditioner operates in the Heat mode.
3To control the direction of the air flow, refer to page 14.
Cooling operation
Heating operation
AP50Q1C_IBIM_E
