Samsung CLP-300 Series Supported Sizes of Paper, Guidelines for Using Paper, Tray *mm/in, Weight

Supported Sizes of Paper

Tray*(mm/in)	Paper tray	Weight	Capacity**
Plain paper	Tray	60 to 90 g/	150 sheets
Letter (216 x 279/8.5 x 11)		m2 (16 to 24	of 75 g/m2
A4 (210 x 297/8.27 x 11.69)		lb bond)	(20 lb
A5 (148 x 210/5.83 x 8.27)			bond) paper
Executive (184 x 267/7.25 x 10.5)
	Manual feed	60 to 105 g/	1 sheet of
Legal (216 x 356/8.5 x 14)		m2 (16 to 23	paper
JIS B5 (182 x 257/7.17 x 10.12)
		lb bond)
A6 (105 x 148/4.13 x 5.83)
Oficio (216 x 343/8.5 x 13.5)
Folio (216 x 330/8.5 x 13)
Envelopes	Manual feed	75 to 90 g/	1 sheet of
No.10 (105 x 241/4.13 x 9.49)		m2 (20 to 24	paper
DL (110 x 220/4.33 x 8.66)		lb bond)
C5 (162 x 229/6.38 x 9.02)
C6 (114 x 162/4.49 x 6.38)
Monarch (98 x 191/3.87 x 7.50)
No.9 (98 x 225/3.87 x 8.87)
6 3/4 Envelop(92 x 165/3.62 x 6.5)
Labels***	Manual feed	120 to 150 g/	1 sheet of
Letter (216 x 279/8.5 x 11)		m2(32 to 40	paper
A4 (210 x 297/8.3 x 11.7)		lb bond)
Transparency films	Manual feed	138 to 146	1 sheet of
Letter (216 x 279/8.5 x 11)		g/m2(37 to	paper
A4 (210 x 297/8.3 x 11.7)		39 lb bond)
Card stocks	Manual feed	105 to 163	1 sheet of
Post Card (101.6 x 152.4/4 x 6)		g/m2(23 to	paper
		44 lb bond)
Minimum size	Manual feed	60 to 120 g/	1 sheet of
(custom, 76 x 127/3 x 5)		m2 (16 to 32	paper
		lb bond)
Maximum size (Legal)	Manual feed		1 sheet of
			paper

*The printer supports a wide range of media sizes.

**Capacity may vary depending on print material’s weight and thickness, and environmental con- ditions.

***Smoothness: 100 to 250 (Sheffield)

NOTE: You may experience jams when using print materials with a length of less than 140 mm (5.5 in). For optimum performance, ensure that you are storing and handling the paper correctly. Please refer to “Printer and Paper Storage Environment” on page 8.3.

8.2

Specifications

Guidelines for Using Paper

For the best result, use conventional 75 g/m2 (20 lb) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.

If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the label on the package.

The following problems may cause print quality deviations, jamming or even damage to the printer.

Symptom	Problem with	Solution
	Paper
Poor print quality	Too moist, too	Try another kind of
or toner	rough, too	paper, between 100 ~
adhesion,	smooth, or	250 Sheffield, 4 ~ 5 %
problems with	embossed; faulty	moisture content.
feeding	paper lot
Dropout,	Stored improperly	Store paper flat in its
jamming, curl		moisture-proof
		wrapping.
Increased gray	Too heavy	Use lighter paper.
background
shading/printer
wear
Excessive curl	Too moist, wrong	Use long-grain paper.
problems with	grain direction, or
feeding	short-grain
	construction
Jamming,	Cutouts or	Do not use paper with
damage to	perforations	cutouts or
printer		perforations.
Problems with	Ragged edges	Use good quality
feeding		paper.

NOTES:

•Do not use letterhead paper printed with low-temperature inks, such as those used in some types of thermography.

•Do not use raised or embossed letterhead.

•The printer uses heat and pressure to fuse toner to the paper. Ensure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (180 °C or 356 °F for 0.1 second).