Samsung CLP-300 Series manual Connecting a Printer Cable, For Local Printing

Connecting a Printer Cable

For Local Printing

To print from your computer in a local environment, you need to connect your printer to the computer with a Universal Serial Bus (USB) cable.

NOTE: Connecting the printer to the USB port of the computer requires a certified USB cable. You will need to buy a USB 2.0 compliant cable that is not longer than 3 m.

1Make sure that both the printer and the computer are turned off.

2Plug the USB cable into the connector on the rear of the printer.

For Network Printing (CLP-300N only)

You can attach your printer to a network using an Ethernet cable (UTP cable with RJ.45 connector). The CLP-300N has a built-in network interface card.

1 Make sure that both the printer and the computer are turned off.

2 Plug one end of the Ethernet cable into the Ethernet network port on the rear of the printer.

3Connect the other end of the cable to the USB port on your

computer.

NOTE: To print using the USB interface, you must run Windows 98/Me/2000/2003/XP or Macintosh with OS 10.3 ~10.4.

2.6

Setting Up Your Printer

To the network LAN connection

3 Plug the other end of the cable into a network LAN connection.

NOTE: After connecting the printer, you need to configure the network parameters using the software supplied with the printer. Refer to 7.1