Using the index and page functions | Speaker Setup |
Use these to view the desired index and page while playing a
Select using the INDEX button if a track is divided into multiple indexes.
Select using the PAGE button if a track contains many still images.
• The INDEX and PAGE buttons can be used only when playing a
• The INDEX button does not work if a track consists of a single index.
• The PAGE button does not work if the current track does not contain still images or if the disc contains a slide- show. Also, still images may be displayed abnormally depending on the authoring method.
Setting the Speaker Mode
You can set the speaker mode for your current system.
Initially it is set as follows.
- Front speaker (L/R): Large
- Center speaker: Not found
-Subwoofer: Not found
-Surround speaker (L/R): Not found
•If you have connected the system to a speaker with low frequencies of 100Hz or below, select "Found (Large)".
•If you have connected the system to a speaker without low frequencies of 100Hz or below, select "Found (Small)".
However, if you don't have a subwoofer connected, always select "Found (Large)" for Front Speakers (L/R).
Setting up TEST
•The test output signals will be heard clockwise starting from the Front Speaker (L). Adjust the channel balance to match the test signal volume stored in the system.
FRONT (L) ➞ CENTER ➞ FRONT (R) ➞ SUBWOOFER ➞ SURROUND (R) ➞ SURROUND (L).
Advanced Operations
53 | 54 |
|
