ENGLISH
Using the battery pack
Important!
ENGLISH
Battery level display
• The battery level display indicates the amount of power remaining in the battery pack.
•When inserting the battery pack, make sure that it is inserted correctly. Otherwise, your DVD player may malfunction.
Charging the battery pack
Use the AC adapter (included) to charge the battery pack.
• Before charging, make sure that the battery pack is correctly seated. |
1. Connect the AC cord to the jack on the AC adapter ( ). |
a. Fully charged b. 20~40% used c. 40~80% used
d. Completely used (flickers)
(The DVD will turn off soon, change the battery as soon as possible)
...........................a
...........................b
...........................c
...........................d
2. | Plug the other end of the AC cord into an AC outlet ( ). |
3. | Connect the DC cord to the DC IN jack on the left side of the DVD player ( ). |
Blinking time | Charging rate |
Once per second | Less than 50% |
Twice per second | 50%~75% |
Three times per second | 75%~90% |
Blinking stops and stays on | 90%~100% |
On for a second and | |
off for a second | the DC cable |
Power Charge Lamp
24
✽The playing times is affected by environmental temperature and conditions.
The playing times becomes very short in a cold environment. The continuous playing times in the operating instructions are measured using a fully charged battery pack at 25°C. As the environmental temperature and conditions may differ when you actually use the DVD, the remaining battery time may not be the same as the approximate continuous
playing times given in these instructions.
25
