Samsung DVD-L100W manual Playing Dolby Digital 5.1-CH and DTS Audio

ENGLISH

ENGLISH

Connecting to a Stereo Component Connecting to a Stereo Component

■Digital Connection Digital Output (optical)

		Playing Dolby Digital (5.1-CH) and DTS Audio
		• You can enjoy full and dynamic surround sound by connecting a Dolby Digital/DTS
		digital surround processor or amplifier equipped with a Dolby Digital/DTS surround decoder
Optical Digital Cable	Connect to optical digital input jack	to the optical digital jack on the DVD player.
		• When using DTS digital surround, select the DTS audio by using the disc menu screen
		or function adjustment screen.

Audio component equipped with optical digital input jack

After the completion of above connections;

1.Set the “Digital Output” to “PCM” (see page 54) in “AUDIO SETUP”.

■Digital connection to audio component or MD player without Dolby Digital decoder

•Audio CD or Video CD

Play the disc, with the audio mode set to “Left” or “Right”. When connecting digitally, DTS-encoded audio tracks will produce distorted sound.

•DVD Disc

When playing a Linear PCM Audio encoded disc, you must use the digital connection method shown above.

CD recording using digital connection to a MD

When digitally connecting to an MD to record the content of a CD, track numbers on the MD and the CD may not match.

Only use an optical Digital Cable which has been designed for use with portable DVD.

Connect to an Optical Digital Input Jack

Optical Digital Cable

(Sold Separately)

Dolby Digital (5.1-Channel)/DTS processor or amplifier

After making the connections shown above;

1. Set the “Digital Output” to “Bitstream” (see page 54) in “AUDIO SETUP”.

Caution

•To play a DTS disc, you need a DTS processor or amplifier.

•If the DTS processor or amplifer you want to use does not have an optical digital input jack, digital connection is not possible.

•Refer to owner’s manual of the processor or amplifier for details on connections.

20 21