Assembling the Front Speaker (HT-ES4200 Only)
You can install the product in one of the following two ways:
Choose a desired one according to the installation area and your decoration plan.
03
Installing on the Partition
The front speakers can be combined by a partition.
1.Connect the left/right speakers to the Partition.
1
Partition 
Connections
2.Insert screws into the hole on the rear of each speakers, and then use screwdriver to tighten screws clockwise.
3.This is the appearance after the speaker is installed.
Installing on the Table Stand
1.Connect the Speaker to the Stand Base.
2.Insert a screw into the hole on the rear of the speaker, and then use screwdriver to tighten a screw clockwise.
3.This is the appearance after the speaker is installed. Follow this steps to install other speaker.
2
3
12
Speaker 
Stand
Base 
3
English 17