Settings

1 · Select Start in the Network Settings screen, and then press the E button. The product searches for and then displays a list of the available networks.

2 · Select the desired network or the Add Network, and then press the E button.

3 · Select Next, and then press the E button again.

4 · If you select the Add Network, enter your wireless router's name to connect.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.

Select Next, and then press the E button again. You can select security type, and then select Next, and then press the E button again.

5 · On the Security screen, enter your network's Security Code or Pass Phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.

6 · When done, select Next at the right of the screen, and then press the E button.

7 · The Network Status screen appears.The product attempts to verify the network connection and fails.

8 · Select IP Settings on the right of the screen, and press the E button. The IP Settings screen appears.

9 · Select the IP Mode field, and then set it to Manual.

10 · Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field.

NOTE

You can get these values from your Internet provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Settings Values." on page 31.

32 English

11 · When done, highlight OK, and then press E button. The Network Status screen appears. The product verifies the network connection and then connects to the network. When it is done, highlight OK, and then press E button.

❑WPS(PBC)

One of the easiest ways to set up the wireless network connection is using the WPS(PBC) function. If your wireless router has a WPS(PBC) button, follow these steps:

1 · Open the Home screen.2 · Press the BLUE (D) button on the remote control.

3 · Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network.

The Network Status screen appears. The product connects to the network after the network connection is verified.

AllShare Settings

The AllShare Settings screen lists your network connected AllShare devices and their IP addresses. Through this screen, you can allow a device to access the product, deny access, or delete the device from the AllShare list.

1 · In the Home screen, select Settings, and then press the E button.

2 · Select Network, and then press the E button.

3 · Select AllShare Settings, and then press the

Ebutton.

4 · Select a device, and then press the E button. The AllShare Settings pop-up appears.

5 · Select Allow, Deny, or Delete from List, and then press the E button.

The AllShare Settings screen only displays devices if you have established networked connections to AllShare devices. For more information about AllShare networked devices, see pages 35~36.

HT-E4200_XU_0223.indd 32

2012-02-24 오전 2:15:09