Upgrading Software

The Software Update menu allows you to upgrade the product’s software for performance improvements or additional services.

•Never turn the product off or back on manually during the update process.1 · In the Home menu, select the Settings, and then press the E button.2 · Select Support, and then press the E button.3 · Select Software Update, and then press the

Ebutton.

4 · Select one of the following methods:•Online•By USB•By Disc•By downloaded•Standby Mode Upgrade5 · Press the E button.Directions for each method begin below.

NOTE

The upgrade is complete when the product turns off, and then turns on again by itself.

Samsung Electronics takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a Software Update.

If you want to cancel the upgrade while the upgrade software is downloading, press the E button.

Online

Your product must be connected to the Internet to use the Online function.

1 · Select Online, and then press the E button. The Connecting to Server message appears.

2 · If there is a download available, the Download pop-up appears with a progress bar and the download starts.

3 · When the download is complete, the Upgrade Query window appears with three choices: Update now, Update later or Don't update.

4 · If you select Update now, the product upgrades the software, turns off, and then turns on automatically.

5 · If you do not make a selection in one minute or select Update later, the product stores the new upgrade software. You can upgrade the software later using the By downloaded function.

6 · If you select Don't update, the product cancells the upgrade.By USB1 · Visit www.samsung.com.2 · Click SUPPORT on the top right of the page.

3 · Enter the product's model number into the search field, and then click Find Product.

4 · Click Get downloads in the centre of the page below the Downloads header.5 · Click Firmware in the centre of the page.6 · Click the ZIP icon in the File column on the right side of the page.

7 · Click OK in the pop-up that appears to download and save the firmware file to your PC.

8 · Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.

9 · Copy the folder to a USB flash drive.

10 · Make sure no disc is inserted in the product, and then insert the USB flash drive into the USB port of the product.

11 · In the product’s menu, go to Settings > Support > Software Update.12 · Select By USB.English 33

Settings 04

HT-E4200_XU_0223.indd 33

2012-02-24 오전 2:15:10