Chapter 2. Hardware
Connection using an IR Stereo cable (sold separately)
• The appearance may differ depending on the product.
Make sure to connect the external sensor kit while the product is powered off. Then, power on the product.
Controlling more than one display product using your remote control
•Connect the IR OUT port on the product to the IR IN port on the other display product using the dedicated stereo cable.
•A command sent from the remote control pointed at product 1 will be received by
both display products 1 and 2 .
1 | 2 |
IR OUT
IR IN
19
Controlling more than one display product using an external sensor kit
• A command sent from the remote control pointed at product 1 (to which the external sensor kit is connected) will be received by both display products 1 and
2.
1 | 2 |
IR IN
IR OUT
IR IN